Available Options

Available Options

TARP SYSTEMS

  • AERO Manual Tarps (with or without ground operation kit)
  • AERO Electric Tarps
  • AERO Air Tarps
  • Mesh or Asphalt canvas

CAB SHIELDS

  • 12” to 48”
  • 13” extension
  • Assembled or loose
  • Narrow or full width
  • Custom
  • Light hole cut-outs (oval or round)
  • LED & strobe lighting kits with marine & fire grade wiring harness

FRONT

  • Standard straight front mount recess (12” deep)
  • Flat front for underbody hoist
  • Flat front for outside front mount hoist (brackets installed)
  • Sloped front for front mount hoist
  • Dog House for Pin to Pin hoist
  • Integraded front hydraulic tank(behind the front mount hoist)
  • Front frame mount hydraulic tank
  • Shovel holder/broom brackets
  • HYVA front mount cylinders
  • MAILHOT front mount cylinders
  • Cradle & hoist blocks (5 to 50 Ton)
  • Front mount hoist Installation kits (tank, cradle, blocks & rear hinge) (5 to 50 ton)
  • Slim front and tanks

SIDES

  • 1 piece sides (formed top rail & rub rail – no welds)
  • Smooth Sides
  • Formed Aerodynamic sides
  • Tapered/slopped sides
  • Vertical posts
  • Weld on Horizontal bracing
  • Box bracing
  • Tube top box rails
  • Inverted angle irons
  • Dirt shedding top rails
  • No front post option
  • Snow extension side board kit
  • Steel side boards
  • Single or double quick release drop sides for MD & MDC models

TAILGATE

    • Standard sloped or straight gate
    • Barn door style tailgate
    • Swing out tailgate
    • Double acting tailgate
    • High-lift tailgate

- Air or hydraulic external rear side mounted system
- Air internal rear post mounted system

  • Asphalt tailgate/bumper (reverse taper)
  • Automatic/excavator tailgate
  • Light hole cut-outs (oval or round)
  • LED & strobe lighting kits with marine & fi regrade wiring harness
  • Standard 2 panel tailgate 1, 3, 6 or 9 panel(vertical or horizontal style available)
  • Coal/material chutes (1, 2 or 3) standard or galantine style
  • Air or manual tailgate kit or combination of both systems
  • Manual quick release tailgate system for MD & MDC models

REAR

  • Flat bumper
  • Asphalt aprons (8”, 10” 12” or custom)
  • Lighting bars
  • Rear hinges ( 5 to 50 ton)
  • 7 gauge 201/304 Stainless steel rear posts
  • Slopped rear post with recessed hardware
  • Scow ends (no gate at all)

UNDER THE BODY

  • 8”, 10” or 12” formed long member
  • 6”, 8” & 10” I-beams or “C” channel(with or without support fl ange)
  • Champion Underbody hoists & sub-frames
  • Body prop (one person operation)
  • Mud fl ap bracket kits (front, rear or both)
  • Brandon mud fl aps (front & rear)
  • Traditional heat kits (4” or 5” stainless steel)
  • Thermo heat kits (for newer truck exhaust systems)

PRE-INSTALL OPTIONS

  • Paint
  • Pre-install cab shield (front clearance height needed)
  • Pre-installed hoist, cradle and hoist blocks
  • Pre-installed wiring & lighting kits (body & cab shield)
  • Pre-Installed cab shield lighting bars
  • Pre-installed body prop & mud fl ap bracket kits
  • Pre-Installed tarp system (excluding canvas)